Trafoworld

Customer Login

Lines of surface treatment and coating

AIRMADI produces lines of surface treatment and coating of transmission and distribution transformers.

APL - Automatic Painting Line for Distribution Transformers

The lines of the mod. APL are designed and built for the production of power transformers tanks.

DO - Drying Oven for Tranformers

The drying ovens mod. DO are designed and built to remove the residual humidity from the various internal components of the transformers.

MPL - Manual Painting Line for Distribution Transformers

The lines of the mod. MPL are designed and built for the production of power distribution transformer tanks of large dimensions.

Products for Dry-Cast Resin Transformers

The insulating system is the decisive factor in the reliability performance and service life for electrical machines and equipment.

Products for Oil Filled Distribution Transformers

The insulating system is the decisive factor in the reliability performance and service life of electrical machines and equipment;

TCT150 - Transformer Core Tester

TCT150 for fast and accurate testing of single phase Unicores and Toroidal cores at 50Hz, 60Hz and any desired frequency up to 400Hz.

UCM3000

The UCM3000 is AEM's entry model core manufacturing machine incorporating new and improved software which enables the production of consistent, repeatable high quality, accurate cores.

UCM425

The UCM425 is AEM's latest model core manufacturing machine capable of strip widths up to 425mm (single strip) and incorporates servo drive cut and fold mechanisms for quieter and faster operation.

UDM4000

The UDM4000 decoiler l has been manufactured by AEM Cores Pty Ltd specifically to be used in conjunction with the AEM Unicore Machine.

Corrugated Walls

CONVETT has two automatic lines, (one brand new from LAE), and can offer: Capacity of 3000 Tons / year; Size from 400 to 1600 mm; Depth from 40 to 400 mm; Thikness 1.0 - 1.2 – 1.5 mm; Fin

Radiators

The main difference between CONVETT and DIN type radiators is that Convett type is made by ovalized tubes and DIN type is made by stamped plate.

Oil Forced Air Forced Heat Exchangers

Convett OIL FORCED AIR FORCED HEAT EXCHANGERS has the following characteristics: Customized design and thermodinamic study for each specific customer request; Dissipation capacity: from 60 kW up to500 Kw; Incl

Equipment for the highly efficient Production of top-quality Cast Resin Transformers

Unlike many other systems, HÜBERS casting systems for transformers are based on sequential on-demand-preparation of the reactive mix by a static mixer instead of batchwise preparation.

NT133-3

The NT133 unit is a new concept device designed to make a revolution on the thermal control of oil-insulated HV/MV transformers, ensuring the accuracy of the temperature reading and the safety of the protection alarms.

NT210K + TPL503

The new system TPL503 + NT210 K represents the innovation for the protection of hermetic oil-filled transformers. Your hermetic oil-filled transformer will never be alone!

NT935ETH

The NT935 ETH is an innovative electronic device microprocessor based, which is designed for dry type and cast resin transformers, with integrated ETHernet port.

NW2004-NW4004C

To eliminate the connection cable between the control panel and the monitored device (transformer/electric motor) TECSYSTEM has designed the new series of wireless equipment NW, exploiting the most advanced Bluetooth technology for data exchange.

TIR409 + NT935IR

The use of the TIR409 sensor coupled to the NT935IR temperature monitoring unit made possible to detect the temperature of MV-HV coils without contact, maintaining a safe distance to meet the required levels of insulation.

MAGNETIC CORE FOR DISTRIBUTION AND CAST RESIN POWER TRANSFORMERS

Slitting and cutting with CNC lines. Assembly of cores on internally designed assembly tables. Final Testing and certification of the product.

MAGNETIC CORE FOR DISTRIBUTION AND OIL POWER TRANSFORMERS

Slitting and cutting with CNC lines . Assembly of cores on internally designed assembly tables. Final Testing and certification of the product.

BL - Measuring benches

Accessory to check the "Length", "Width", "Angle" and "Linearity" of cut core sheets up to 900 mm wide and 5000 mm long.

BNI - Core Assembly Benches

The core assembly benches allow to assemble main cores for distribution transformer both with Step Lap and non Step Lap systems, for sheets with holes and not. The core is assembled without the top joke, to allow the insertion of the transformer coils.

BOB ER-SP - Wire Winding Machine

The BOB ER-SP is a simple machine which gives the possibility to properly wind a wide range of coils for distribution transformers, using full width insulation & edge strips.

BOB FPN - Wire Winding Machine

The BOB FPN is a very powerful and versatile machine which gives the possibility to properly wind a wide range of coils for distribution transformers, from very thin round wire to medium round and flat wires. The machine can perform windings using graduated layer strips giving extreme flexibility of use and consistent savings in winding times and materials.

BOB FPN 06- 08 -14 - Wire Winding Machine

The BOB FPN is a very powerful and versatile machine, which can wind a wide range of HV coils for distribution transformers, using round and rectangular wires.

BOB L 1200 - Foil Winding Machine

The machine is designed to wind LV transformer coils, with one or two foils made of copper or aluminum strips.

BOB L 120M/150/200M - Winders for Resin Transformers

The machines are designed to wind automatically HV multisection coils of cast resin transformers using copper or aluminum strips.

BOB L 1600 - Foil Winding Machine

The machine can wind LV transformer coils, using 1 or 2 conductors which can be overlapped or side by side using up to a foil width of 1600 mm.

BOB L 600 - Foil Winding Machines

The winding machines BOB L 600 is designed to wind LV transformer coils ranging from 100 to 2.500 kVA with one foil made of copper or aluminium.

BOB L 800 - Foil Winding Machine

The winding machine BOB L 800 is designed to wind LV coils for Distribution Transformers ranging from 100 to 3150 kVA, with one foil made of copper or aluminium.

BOB P - Horizontal Winding Machines

3 machines model BOB P 1500, BOB P 2000 and BOB P 3000 having similar design concepts allows to cover the different ranges of windings required for the power transformers up to coil diameter of 3000 mm.

BOB P 800 - Wire Winding Machine

The BOB P 800 is a very powerful and versatile machine which gives the possibility to properly wind a wide range of LV coils for distribution transformers, using up to 4 flat wires in parallel.

BOB V - Vertical Winding Machine - Platform type

The winding machine model BOB V 2000 can wind coils for power transformers with vertical winding system that is particularly suitable for the HV disc winding, for which, time savings and coil compactness are the most evident advantages.

BOB VF - Vertical Winding Machines - Pit type

The winding machines model BOB VF 2000 and BOB VF 3000 can wind coils with vertical winding system (particularly suitable for the HV disc winding).

DLF - Low frequency drying and curing equipment

The DLF equipment is designed for a modern and fast drying and curing of the active parts with the tecnology of low frequency drying and it's suitable for distribution transformers.

Expandable Mandrels

The mandrels produced are designed for horizontal or vertical use, thus delivering windings with diameters ranging from 90mm to 2000mm and lengths from 550mm to 3500mm.

MACPO 1000 - Corrugated Panel Line

MACPO 1000 line, including the optional, is made up of the following machines: A sheet decoiler; A folding machine for fin forming; A welding machine to weld the side edges and to insert the reinforcing rod; Connection/transport roller unit.

MACPO 1600 - Corrugated Panel Line

The MACPO 1600 line allows to produce corrugated panels from flat sheets in coils and to weld their edges in a fully automatic way obtaining tanks for transformers.

MPFC V1 - Transformer tank fatigue testing machine

The MPFC V1 allows to submit a transformer tank to fatigue tests by means of a series of programmed cycles of oil with positive and negative variation of the inside pressure.

PPV 1600 - Vertical Bending Unit

Vertical bending unit PPV 1600 allows to form 4 panels composing the complete transformer tank. Using this system it is possible to eliminate three weldings, to save time of assembling and to weld the tank with a strong reduction of leakage risks.

MTCL - Insulation slitting machine

The MTCL is a slitting machine specially designed for the transformers use, where flexibility and easy set-up solutions play an important role.

Second Hand Core Cutting Line model TE 60

The machine can cut till 600mm width and is regularly working since January 2012.

SF4 - Four way flattener

The four-way flattener allows to shape aluminum and copper round wires into rectangular cross sections as the wire is being wound.

TE 100 - Step Lap Core Cutting Line

The core cutting line model TE 100 is designed and built for the production of grain-oriented laminations suitable for the assembly of cores with Step Lap system used on power transformers and can cover up to a max sheet width of 1000 mm.

TE 45 - Step Lap Core Cutting Line

The core cutting line model TE 45 is designed and built for the production of grain-oriented laminations suitable for the assembly of electric transformer cores with Step Lap system and can cover up to a max sheet width of 450 mm.

TE 65 - Step Lap Core Cutting Line

The core cutting line model TE 65 is designed and built for the production of grain-oriented laminations suitable for the assembly of electric transformer cores with Step Lap system and can cover up to a max sheet width of 650 mm.

TM 1000 - Tank Manipulator

The TM 1000 manipulator is a device to be used to rotate the tank during bead welding.

TN 30 - 90° Core Cutting Lines

Cut to length line for cores of small transformers made of Grain Oriented or Non Oriented Silicon Steel to cut 90° shapes.

TO 25 - Step Lap Core Cutting Line

The core cutting line model TO 25 is designed and built for the production of grain-oriented laminations suitable for the assembly of electric distribution transformer cores with Step Lap system and can cover up to a max sheet width of 250 mm.

ATMoS

System for automatic on-line drying and cleaning of oil-paper insulated transformers with advanced control technology. Easy to install and operate, execution and control system adaptable to your individual needs.

CLEVER-TRANSFO CLEVER-MT CLEVER-INDUCTOR

CLEVER-TRANSFO, CLEVER-MT and CLEVER-INDUCTOR are wholly innovative applications to generate a comprehensive electrical and mechanical design of transformers, reactors and inductors.

PPO 1600 - Horizontal Bending Unit

Vertical bending unit PPV 1600 allows to form 4 panels composing the complete transformer tank. Using this system it is possible to eliminate three weldings, to save time of assembling and to weld the tank with a strong reduction of leakage risks.

OPTI-DESIGN

Transformer design software with optimization algorithm for oil and dry type distribution and medium power transformers

TRAX Transformer and substation testing

TRAX is a multi-function transformer test instrument performing to the highest accuracy, safety and productivity standards.

BUSHINGS

Porcelain and epoxy-resin bushings

LTC 100-LP

The slitting line LTS 100-LP is designed and built to slit the mother coils of grain oriented/not oriented silicon steel, obtaining then the smaller coils of required size to feed the core cut-to-length lines for the production of laminations for transformer cores.

LTS - 125

The slitting line LTS 125 is designed and built to slit the mother coils of grain oriented/not oriented silicon steel, obtaining then the smaller coils of required size to feed the core cut-to-length lines for the production of laminations for transformer cores.

REGEN

MAXEI REGEN type regeneration machines are designed to operate on On-load transformers (or Off-load)

IMPREGNATION Solutions

The impregnation with varnishes or with resins enables to protect the insulation of the motor or other pieces against the outside aggressions.

OIL Treatment

Efficient and reliable operation of transformers, circuit breakers, and other types of electrical equipments, depends upon the electrical and physical properties of the dielectric fluid which in service may be seriously affected, resulting in reduced operating efficiency or even equipment failure.

DIELECTRIC Oil Treatment

WHAT is treating live transformers for? To treat a live transformer means to carry out the operations of filtration, dehydration and absorption of dissolved gases on the fluid that is contained in the transformer while the transformer is under current and operating.

Vacuum Ovens

Thanks to a worldwide reputation, MAXEI is well known since its establishment for the reliability and the performances of the equipments supplied on the 5 continents. Our know-how covers the manufacturing process for the transformers and the rotating machines as well as the most efficient means for mechanical, thermal, thermo-dynamical and processing fields.

STATOR AND ROTOR LAMINATIONS

It's an external diameters of up to 600 mm

STATOR AND ROTOR PACKS

Stator, rotor packs or assembled poles created using different technologies.

ROTORS WITH SHAFT

If it's requested by the costumer, we can supplu the rotors with the shaft inserted.

STATORS AND ROTORS PRODUCED WITH SLINKY TECHNOLOGY

Stators and rotors produced from a steel strip blanked in a straight line and the rolled on the flat.

COMPONENTS FOR ELECTRIC MOTORS

Metal components for small electric motors

INSULATING TAPES AND SHEATHS

Insulating tapes and sheats available in different format

AM3150 VPL MV - for medium voltage instrument transformer coils

The AM 3150 VPL MV is designed for the production of medium voltage transformers coils.

Foil Winding Machine

BOB L 800 is.....